9.6M Length 600kg/H Charcoal Carbonization Furnace Waste To Power Plant

Waste Biomass Material to Charcoal Carbonization Furnace mainly contains the Gas produce stove, Condensor, Screw Conveyors, Fans, smoke processing system, Wood tar separate system, cooling system etc. The processing mainly contains the heating period, carbonize period, cooling period .

Waste Biomass Material to Charcoal Carbonization Furnace Applicated Raw Materials:

Sawdust, rice husk, coconut shell (before processing, its better crushed first, then its much better for carbonize . ), baggass, jute, agriculture waste, wood chips etc.

Waste Biomass Material to Charcoal Carbonization Furnace Working Principle:

The gasifier is used to preheating the carbonizer, when the temperature reach to 300℃, the feeding screw conveyor start to feeding raw material into the carbonizer.the material will produce fuel gas, which will be collected and used to heating the carbonizer after cleaning by the filter and purification system. The temperature of carbonizer will control at 600 degrees Celsius.

Waste Biomass Material to Charcoal Carbonization Furnace is fueled by the syngas(carbon monoxide, methane, ethane etc.) from the furnace itself. The biomass material will produce plenty of combustible gas during the carbonzation process pyrolysis, the syngas is very pure combustible gas through smoke purify system . Wood tar, wood vinegar other impurities was isolated by the filter and purification system (gas cleaner / dust-removal / purify tank / scrubber)

When the carbonizer can produce enough flue gas and reach to self sufficient combustion, close the gasifier and open all the flue gas valve of the carbonizer gradually, finally achieve flammable gas self-sufficiency carbonization.

Waste Biomass Material to Charcoal Carbonization Furnace Technical Details: